Eachine EB185 FPV Racing Drone with Mini NZ GPS OSD 5.8G 40CH HD Camera RTF
Package size: 470mm*240mm*130mm
Frame weight: 364g include (AIO Plate, Motor, Propeller, GPS, Antenna)
Highly integrated design aircraft for FPV flight.
The aircraft body is made of carbon fiber materials,
plus a protective cover motor design, all makes the EB185 solid.
|Naze32 Rev6 Full function 32bit|
Naza32 Rev6 Full 10DOF flight controller,
The newest Naze32 Rev6 Full function Flight controller.
Buid in Cleanflight Black box, it can now log your flight data with BlackBox feature.
This is a great tool for diagnosing problems, It’s also great for
tuning PID and other flight performance settings.
|FPV Camera||Resolution: 520TVL HD|
Video format: NTSC or PAL Switchable
Effective pixel: 720(H)x480(V)
Sensor: 1/4 inch HD Colour CMOS
Lens angle: H: 120 degree/V: 100 degree
Working voltage: 5V
Working current: 80mA
Cells (s): 3S
Discharge (c): 25
Weight (g): 111
Max Charge Rate (C): 2
Support 3-4S battery
|ESC||Eachine B12A brushless esc|
Continuous current: 12A
Burst current: 15A(10s)
Li-xx Battery: 2s-4s
|Motor||Eachine B1806 2300KV|
Stator Diamter: 18mm
Stator Length: 6mm
Shaft Diameter: 2mm
Motor Dimension(Dia.*Len): F23*30.1mm
Idle current(10)@10V(A): 0.35
No. of Cells(Li-po): 2-3S
Max Continuous Power(W)180S: 135
Internal Resistance: 118mO
Max Current(180S): 12A
Max.Effciency Current: (2-7A)>83%
5.8G 40ch 400mw Video transmitter
Wireless Channel: 40CH
Modulation : Broadband FM
Support Video Format: NTSC/PAL
Video input impedance : 75 Ohm
Audio input impedance: 10K Ohm
Output Signal: 23~24dBmOutput Power : 400mw(Max)
Working voltage: 5V
Working current: 500mAOperating
Antenna Connector: RP SMA
|Eachine I6 2.4G Transmitter||Channels: 6 Channels|
RF Range: 2.40-2.48GHz
RF Power: Less Than 20dBm
Low Voltage Warning: less than 4.2V
DSC Port: PS2;Output: PPM
Charger Port: No
ANT length: 26mm*2(dual antenna)
Power: 6V 1.5AA*4
Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
On-line update: yes
Model Memories: 20
|Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.|
This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission
Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.
|Eachine I6 2.4G|
6 channel Receiver
|Channels: 6 Channels|
RF Range: 2.40-2.48GHz
RF power:less than 20dBm
ANT length: 26mm
i-BUS port: NO
- The newest Naze32 Rev6 Full verssion Flight controller High stability flying.
- Real-time image transmission, Built-in OSD(the flight voltage of battery,flgiht time, flight speed, Coordinates, direction).
- 120 degree CMOS HD FPV camera PAL/NTSC to choose and 0°-30°Camera angle switchable.
- Built in Cleanflight Black box, it can now log your flight data with BlackBox feature. This is a great tool for diagnosing problems.
It's also great for tuning PID and other flight performance settings.
- Built in mini NZ GPS, real-time observation flight direction and angle.
- 1 X Eachine EB185 frame kit
- 1 X AIO Plate ( Internal:1 X Naze32 Rev6 Full 10DoF Flight controller Build in Black box
4 X 12A Be-Heli 2-4S ESC
1 X 5.8G 40CH Raceband Transmitter
1 X OSD for Naze32
1 X Buzzer for Naze32
1 X LC-Power filter )
- 1 X FPV transmitter Antenna
- 4 X 1806 2300KV motor
- 8 X 4045 propeller (4*CW 4*CCW)
- 1 X 520TVL CMOS 120 degree FPV camera
- 1 X 3s 1300mah 25C lipo battery
- 1 X B3PRO charger
- 1 X Mini NZ GPS
- 1 X Eachine I6 transmitter
- 1 X Eachine I6 receiver
- 1 X TX60 receiver signal Installer
- 1 X Spektrum DSM/DSMX receiver transfer cable
- 1 X OSD tool
- 1 X EVA bottom frame buffer
- 1 X Data cable
- 1 X Allen wrench
- 1 X Battery paste
- 1 X Battery Tie
- 1 X Box