2 Axis Flir Tau 2 Micro Gimbal for DJI Inspire 1

DJI Inspire 1 capture the unforgettable.

All of the core technologies of the DJI Inspire 1 have been engineered into the Zenmuse X3 gimbal. This keeps the 4K camera steady in the sky and ensuring stable, professional footage every time. The 3-axis gimbal constantly draws on data fed by the intelligent flight controller so it knows the aircraft’s flight parameters.  Angular velocity, momentum, inertial force and even GPS data allows the gimbal to apply countering power and force keeping the camera perfectly level.

The DJI Inspire 1 Camera shoots 4K video at up to 30p and HD video frame rates up to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis

Carbon fibre arms give lightweight strength to manoeuvre in the air and move out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, the Inspire1 is able to capture shots independent of the flight direction.

The all new 13 inch quick release carbon fibre rotors are built with the unique DJI “Z-Blade” design.

DJI Inspire 1 V2

Brushless motors pioneered by DJI are now the standard in the multirotor quadcopter industry. In addition, the Inspire 1 takes the next step in brushless development by integrating curved magnets that fit flush around the edge of each motor. Although much more difficult to produce, these magnets eliminate airflow gaps within the motor, greatly increasing efficiency.