650 Gimbal Models - Worldwide Shipping - Live Support

Flir Duo Pro R Integration Mount Kit for DJI Inspire 1

Lightweight Integration Mount Kit Gimbal for Flir Duo Pro R camera and DJI Inspire 1 - Video Stabilized Controllable Gimbal

SKU:OORNTTRIE1557
Init A Live Chat Session For Any Question
Delivery date:Manufactured Per Order Request, Dispatched in 2 weeks
Manufacturer: Copterlab

$319.04
excluding shipping

Copterlab Gimbals 30DAYS Money back GuaranteedCopterlab Gimbals Lifetime Guaranteed
Flir Duo Pro R Integration Mount Kit Gimbal
for DJI Inspire 1

Material: Carbon ABS gimbal fits perfectly with Flir Duo Pro R camera for thermal imaging.

This Integration Mount Kit avoid motor vibrations coming from the frame.

Screws, 4 damper balls Included.

You can control Flir Duo Pro R tilt angle orientation with Gopro thumbscrew (from straight down to straight forward).

You need to buy FLIR VUE Series Power/Video Module to get live view from thermal camera to DJI Lightbridge.

Weight: 100g (vibration isolation dampers + mount adapter)


Why choose Copterlab gimbal?

Copterlab gimbalOther gimbals
SupportLive support (website - Skype - email)No any support at all
ContentReady to useNeed to mount and setup it
MaterialCarbon ABSPoor 3d printed parts or aluminum parts
Weight100gUnknown
Camera adapterLot of and we can create yours for freeNo
JelloNo jello garanteedYou need to spend lot of time to avoid it
ColorsGold, Silver, White Gloss, Black Gloss-
Country madeFranceChina for sure
CostsNot cheap, lot of time to create itYou get that you paid
WarrantyLifetime: all 3D parts can be replaced freely, only shipping costs are paid by customerNothing

FLIR DUO PRO R

The ultimate drone thermal imaging solution is here. The new FLIR Duo Pro R combines a high resolution, radiometric thermal imager, 4K color camera, and a full suite of on-board sensors to bring you the most powerful dual-sensor imaging solution in the world for small commercial drones. Capture actionable data any time with Duo Pro R.

  • TOP-OF-THE-LINE DRONE IMAGING

View thermal and hi-def color imagers in flight, or see them both in picture-in-picture mode, all while recording video and stills on two microSD cards.

  • BUILT-IN SENSOR SUITE FOR IMAGE GEO-TAGGING Fully integrated GPS receiver, IMU, magnetometer, and barometer. This provide all the data needed to create accurate orthomosaics without integrating to external flight controllers.
  • EASY TO CONFIGUREEasy configuration with the FLIR UAS app lets pilots set colour palettes, image optimization features. Configure PWM inputs without lugging a computer to the field.

Thermal Sensor Resolution Options:

  • 640 x 512
  • 336 x 256

Thermal Lens Size Options:

  • 9 mm
  • 13 mm
  • 19 mm
  • 25 mm

DJI Inspire 1 capture the unforgettable.

All of the core technologies of the DJI Inspire 1 have been engineered into the Zenmuse X3 gimbal. This keeps the 4K camera steady in the sky and ensuring stable, professional footage every time. The 3-axis gimbal constantly draws on data fed by the intelligent flight controller so it knows the aircraft’s flight parameters.  Angular velocity, momentum, inertial force and even GPS data allows the gimbal to apply countering power and force keeping the camera perfectly level.

The DJI Inspire 1 Camera shoots 4K video at up to 30p and HD video frame rates up to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis

Carbon fibre arms give lightweight strength to manoeuvre in the air and move out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, the Inspire1 is able to capture shots independent of the flight direction.

The all new 13 inch quick release carbon fibre rotors are built with the unique DJI “Z-Blade” design.

DJI Inspire 1 V2

Brushless motors pioneered by DJI are now the standard in the multirotor quadcopter industry. In addition, the Inspire 1 takes the next step in brushless development by integrating curved magnets that fit flush around the edge of each motor. Although much more difficult to produce, these magnets eliminate airflow gaps within the motor, greatly increasing efficiency.

A fully integrated intelligent battery powers the Inspire 1 and virtually manages itself. The remaining battery power is visible during flight. The system will calculate the time the aircraft needs to return home and will let indicate when it’s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps keep the Inspire 1 in the air and flying for years to come.

The main controller is the brain of the entire system and receives thousands of bits of data every second. Function of the main controller is to translate that data into action during flight. The main controller tells every part of the Inspire 1 what to do. It also calculates environmental conditions in real-time. Ensuring the aircraft responds to commands instantly.

Related products

You Didn't Find Your Gimbal?

That means we didn't work enough. Start a conversation with our technicians by chat or by contact page, they will be happy to answer you asap with the most suitable solution for your needs.


Why ordering gimbals here?

Here you won't find some chinese rebranded gimbals.

We manufacture the whole gimbal parts that means

- Motors

- Gimbal controller

- Camera mount

- Frame mount

What if i crash my Copterlab gimbal?

Each part can be replaced easily by cheap offer as we manufacture each part of the gimbals we sell

What if i'm running under issue with my Copterlab gimbal?

Our support will reply you quickly by email or live chat support. After purchasing, you stay our priority.

What if i can't find model i'm searching for?

Just contact us and we will design custom parts for free!)

I just want to get the electronic and motors gimbal parts

Just click here

Designed in NevadaMade in France
We stand for USA