500+ Gimbal Models! - Worldwide Shipping - Live Support

Hiphen Airphen NDVI Integration Mount Kit for DJI Inspire 2

Lightweight Integration Mount Kit for Hiphen Airphen multispectral camera and DJI Inspire 2 - Video Stabilized Controllable Gimbal

SKU:NINTTRIE1236
Init A Live Chat Session For Any Question
Delivery date:Manufactured Per Order Request, Dispatched in 2 weeks
Manufacturer: Copterlab

*

*

*


*
$322.27
excluding shipping

Copterlab Gimbals 30DAYS Money back GuaranteedCopterlab Gimbals Lifetime Guaranteed
Hiphen Airphen Integration Mount Kit
for DJI Inspire 2

Material: Carbon ABS Integration Mount Kit fits perfectly with Hiphen Airphen Multispectral Sensor and optional Flir Tau 2 for multispectral imaging.
This Integration Mount Kit avoid motor vibrations coming from the frame.

The Airphen datasheet (in pdf) is available here

Screws, 4 damper balls, +5v Ubec included.

Weight: 150g (gimbal + vibration isolation dampers + mount adapter)

Power is taken from external lipo battery without avoiding DJI warranty

Multispectral sensors comparison matrix
Validated by Micasense for RedEdge/Sequoia sensor and Hiphen for Airphen

Parrot Sequoia

Micasense Rededge-M

Hiphen Airphen

Number of bands

4

5

6

Shutter mechanisms

Rolling

Global

Global
Possibility of radiometric synchronization with Flir Tau2 thermal camera

Top of Frame Pulse

Nope

Sync pulse to externally triggered cameras and RTK timing pulse

Sync pulse to externally triggered cameras and RTK timing pulse

Input trigger

USB, Wi-Fi

Gig-Ethernet interface, Serial, or PWM

Gig-Ethernet interface, Serial, or PWM

Capture rate

1 fps

1 fps

1 fps

Sensor Resolution

1280 x 960 pixels

1280 x 960 pixels

1280 x 960 pixels

Storage

Internal + SD card high speed

Internal + SD card high speed

SD card high speed (32Go, 64Go,...)

Data format

10 bit (1024 values)

Uncompressed and geotagged TIFF, 12 bits per pixel (4096 values) saved on 16 bits

Uncompressed and geotagged TIFF, 12 bits per pixel (4096 values) saved on 16 bits

Ground Sample Distance (GSD) -100m

11 cm/pixel

6,8 cm/pixel

8mm - 4,7 cm/pixel

4.2mm - 8,9 cm/pixel

With double swath feature

External Light Sensor

Yes

Yes

Done by software correction

FOV

Single

Single

5.5mm -

Single or Double

8mm - 33°x26° / 4.2mm - 60°x46°

Weight

135g

173g

207g

Power Input

4.5V - 6V

5V - 15.8V

7V - 30V

Power consumption

10 w/h

6 w/h

7w/h

GPS

External

External

Internal or External

Customizable wavebands

No

No

(450, 530, 560, 570,620,675, 710, 730, 750, 850) and others

FWHM

-

20mm for blue & green

10mm for red & rededge

40mm for NIR

10mm for all bands or customized

Price

$3,500 USD

$4,900 USD

10,900 EUR


Why choose Copterlab gimbal?

Copterlab gimbalOther gimbals
SupportLive support (website - Skype - email)No any support at all
ContentReady to useNeed to mount and setup it
MaterialCarbon ABSPoor 3d printed parts or aluminum parts
Weight150gUnknown
Camera adapterLot of and we can create yours for freeNo
JelloNo jello garanteedYou need to spend lot of time to avoid it
ColorsGold, Silver, White Gloss, Black Gloss-
Country madeFranceChina for sure
CostsNot cheap, lot of time to create itYou get that you paid
WarrantyLifetime: all 3D parts can be replaced freely, only shipping costs are paid by customerNothing

DJI Inspire 2

The DJI Inspire 2 is the first DJI drone to have the ability to feature not one, but two cameras. The unit has its main camera for capturing footage slung underneath on a three-axis gimbal. Just like the first model, the Inspire 2’s legs lift up, so they won’t block the camera’s view. The camera can freely rotate 360 degrees to capture action in any direction. In addition, there is now a simple, two-axis camera on the front that allows the pilot to always see where the drone is headed. The system is designed for dual operators: one pilot, one director framing the action, each receiving their own live video feed.

If you’re flying solo, the Inspire 2 can help you achieve some tricky shots with the use of computer vision and autonomous navigation. Like other new DJI products, the Inspire 2 now has sensors that allow it to see and avoid obstacles. Vision sensors are placed on the front and bottom of the unit, and infrared sensors sit on top. The unit also features the computer vision system and automatic subject tracking. This means you can lock onto a subject and the camera will rotate to keep them in frame. This happens while the aircraft flies freely in another direction.

Image quality, power and intelligence to meet the needs of professional filmmakers and enterprises around the globe.

Featuring the new CineCore 2.0 system, it can capture 5.2K video at a whopping 4.2Gbps bitrate. To handle all that data, the Inspire 2 has added an onboard SSD. For photographers there is a DNG RAW mode that captures 30-megapixel still images. And it can stream video in broadcast-quality formats for local news crews who want live aerial video from the scene of an unfolding event.

Also powerful enough for industrial customers doing things like infrastructure inspection, site surveys, and security.

You Didn't Find Your Gimbal?

That means we didn't work enough. Start a conversation with our technicians by chat or by contact page, they will be happy to answer you asap with the most suitable solution for your needs.


Why ordering gimbals here?

Here you won't find some chinese rebranded gimbals.

We manufacture the whole gimbal parts that means

- Motors

- Gimbal controller

- Camera mount

- Frame mount

What if i crash my Copterlab gimbal?

Each part can be replaced easily by cheap offer as we manufacture each part of gimbal

What if i'm running under issue with my Copterlab gimbal?

Our support will reply you quickly by email or live support even after your purchase you stay our priority

What if i can't find model i'm searching for?

Just contact us and we will design custom parts for free!)

Designed in NevadaMade in France