Name: Micasense RedEdge MX NDVI Integration Mount Kit for DJI Mavic 2 Zoom
Brand: Copterlab
SKU: EXINTTRIC21442
Availability: InStock
Rating: 5.0 (1 reviews)

Micasense RedEdge MX NDVI Camera

The rugged, built-to-last, professional multispectral sensor for agricultural drone mapping. The Micasense RedEdge MX is now ready to integrate with DJI SkyPort enabled drones for $11,100.

Five narrow band multispectral sensors.
Capture plant health images and RGB (color) images in one flight.
High image resolution; 8 cm/pixel at 400 ft (120 m).
Single SD card stores all images with geotags.
DLS 2 with embedded GPS for easier integration, enhanced light calibration

The new Micasense RedEdge MX captures not just the spectral bands required for basic crop health indexes, but also those that generate analytics that are anything but basic. With its low weight, low power requirement, and multiple integration options, the RedEdge MX is one of the most flexible solutions on the market — now in a smaller size and at a lower cost.

The Micasense RedEdge MX is a reliable, accurate, high-precision sensor.

Flight time is important. With the Micasense RedEdge-MX, you can fly a 160-acre field (at 400 ft AGL, 70% overlap) in 27 minutes! Choose between various data processing platforms to analyse the raw data collected by the Micasense RedEdge-MX.

The MicaSense RedEdge MX is an advanced, lightweight, multispectral camera optimized for use in small unmanned aircraft systems, and available for use on manned aircraft as well. RedEdge™ provides accurate multi-band data for agricultural remote sensing applications.

Features

Simultaneously capture of five discrete spectral bands optimized for crop health data gathering.
Fly fast – we can keep up! All bands are captures once per second enables faster flight speeds and lower altitude captures.
Distortion-free – global shutter design creates distortion-free images on every platform.
Single card – tired of juggling multiple cards? With RedEdge™, one SD card stores all images and data for easy data transfer.
Metadata included – all image files are time-stamped and geo-tagged, no third party tools or autopilot logs required.
Fully calibrated – leave your integrating sphere at home, we have you covered. Every camera comes fully calibrated for precise, repeatable measurements every time.
Stand-alone – with external GPS connections and self-triggering capability, easily collect geo-tagged data without any connections to the host vehicle.
Data at your fingertips – With Wi-Fi built in, preview images and change settings from your phone, tablet, and computer.
Fully integrated – our convenient ethernet, serial, and Wi-Fi host interfaces allow tight integration with any platform.
No moving parts – solid-state design means nothing to break on those dusty days or the occasional harsh landing.

Specifications

Weight:	173 grams (6.1 oz) (includes DLS and cables)
Dimensions:	9.4 cm x 6.3 cm x 4.6 cm (3.7 in x 2.5 in x 1.8 in)
External Power:	4.2 V DC – 15.6 V DC 4 W nominal, 8 W peak
Spectral Bands:	Blue, green, red, red edge, near-IR (global shutter, narrowband)
RGB Color Output:	Global shutter, aligned with all bands
Ground Sample Distance (GSD):	8 cm per pixel (per band) at 120 m (~400 ft) AGL
Capture Rate:	1 capture per second (all bands), 12-bit RAW
Interfaces:	Serial, 10/100/1000 ethernet, removeable Wi-Fi, external trigger, GPS, SDHC
Field of View:	47.2° HFOV
Custom Bands:	400nm – 900nm (QE of 10% at 900nm)
Triggering Options:	Timer mode, overlap mode, external trigger mode (PWM, GPIO, serial, and Ethernet options), manual capture mode

You Didn't Find Your Gimbal?

That means we didn't work enough. Start a conversation with our technicians by chat or by contact page, they will be happy to answer you asap with the most suitable solution for your needs.

Why ordering gimbals here?

Here you won't find some chinese rebranded gimbals.

We manufacture the whole gimbal parts that means

- Motors

- Gimbal controller

- Camera mount

- Frame mount

What if i crash my Copterlab gimbal?

Each part can be replaced easily by cheap offer as we manufacture each part of the gimbals we sell

What if i'm running under issue with my Copterlab gimbal?

Our support will reply you quickly by email or live chat support. After purchasing, you stay our priority.

What if i can't find model i'm searching for?

Just contact us and we will design custom parts for free!)

I just want to get the electronic and motors gimbal parts

Just click here

	Copterlab gimbal	Other gimbals
Support	Live support (website - Skype - email)	No any support at all
Content	Ready to use	Need to mount and setup it
Material	Carbon ABS	Poor 3d printed parts or aluminum parts
Weight	100g	Unknown
Camera adapter	Lot of and we can create yours for free	No
Jello	No jello garanteed	You need to spend lot of time to avoid it
Colors	Gold, Silver, White Gloss, Black Gloss	-
Country made	France	China for sure
Costs	Not cheap, lot of time to create it	You get that you paid
Warranty	Lifetime: all 3D parts can be replaced freely, only shipping costs are paid by customer	Nothing

650 Gimbal Models - Worldwide Shipping - Live Support

Micasense RedEdge MX NDVI Integration Mount Kit for DJI Mavic 2 Zoom

100g Lightweight Integration Mount Kit for Micasense RedEdge-MX sensor and DJI Mavic 2 Zoom - Manual Controllable Pitch Angle & Vibration-Free Integration Mount Kit